3.4K views · 68 reactions | The Kreg Adaptive Cutting System leaves...

Let's square up this panel! Creating glued-up panels is a lot easier if you leave the boards a bit long and use a track saw to trim the ends to your final length. Learn more about what you can do with a track saw: https://bit.ly/3z4w7Xg | Kreg Tool

Thanks to CReeves Makes for the Adaptive Cutting System tips! Learn more about the ACS here: https://bit.ly/3odQYyJ From Casey: Don’t have a taper sled or table saw? Try cutting templates for legs and stretchers using the @kregjig ACS. There are two ways to do it. 1. Set the leg and stretcher on edge on a flat surface and scribe the leg angle onto the stretcher and then clamp and cut to the line. 2. Or you can use the leg against the track to set the angle and align the stretcher to it, clamp it

Kreg Clamps can really help when you're trying to assemble your projects. Check out how @smashingdiy uses the 90 degree Clamp and a couple others to put her project together! You can check out our clamps and more at KregTool.com | Kreg Tool

Five reasons you need a track saw. For those of you who own one, what else would you add to this list? ✨5 Reasons To Own A Track Saw✨ 1. Cut sheet goods without the hassle of a table saw 2. Get ready-to-join edges without a jointer 3. Easily rip solid boards and boards with rough edges 4. Trim large slabs and glued-up panels after assembly 5. Make laser-straight cuts and super-accurate bevels | Kreg Tool

Do you build a lot of plywood projects? Quickly break down those large sheets with our track saw, just lay the track on your mark and cut! 📷 by @grovebuilds Learn more and shop at https://bit.ly/3w3EK2E | Kreg Tool