Rounding over small pieces on the CNC machine using the #56142 1/16" radius point roundover bit. Using the Stepcraft M.700 CNC machine, available on our website, I started off doing a profile cut with the @amanatool #46176-K 1/8" Spektra™ coated compression bit from @toolstoday. Be sure to check out the full project video, link in bio! - - - - - - - - #TeamTOOLSTODAY - - - - - - - - 46176-K RPM: 18,000 Feed Rate: 40ipm Plunge Rate: 20ipm Depth per pass: .25" - - - - - - - - After cutting the pro

Point roundover bits are amazing tools! This point roundover bit allowed me to get a larger roundover on this tray than I would have been able to accomplish using traditional roundover bits on a router table due to the height of the tray. To do this I set the bit up as an 18 degree v-bit in the Vectric software and cut a profile on the inside and outside of the line to the depth of the point roundover bit. I've tried setting this up as a form tool, but can't seem to get it to cut correctly, this

With a Roundover Bit Trick. As shown in the video, you can make a round bar by using an R router bit! This time, I used that round bar to make a sandpaper holder. Please use this as a reference and try making it yourself. #jig #woodworking #diy | Japanese woodworking skills