Logic analyzers, though originally intended for debugging parallel logic, remain important in the development of ultra-high-speed serial-bus hardware, even though the data rate of such buses often ...
Standard parallel-bus structures are reaching their performance limits. The only way to increase system bandwidth is to switch to a serial-bus structure. Although serial structures promise enhanced ...
The Xtreme Bus Emulator (XBE) VXI-bus emulator allows the emulation of a digital parallel or serial bus by downloading a unique micro-code that defines the bus protocol scheduled for execution. It ...
A shared channel that transmits data one bit after the other over a single wire or fiber; for example, Ethernet uses a serial bus architecture. The I/O bus from the CPU to the peripherals is a ...
The first parallel-to-serial I2C interface lets designers add I2C interfaces to any digital system. The PCA9564 controller provides a 400-kHz I2C serial bus and operates from 2.5 to 3.3 V. The chip is ...
This is just a general question. I know, obviously, that there are RS-232 "serial ports" and IEEE 1284/Centronix ports "parallel ports," and that these are "digital" connections. Then you have things ...
It works in STANDARD and FAST MODE. In the following lines, it is explaned hot to use I2C_MASTER inside an FPGA (GOWIN) and test it with and STM32 mcu. HOW TO CONTROL ...
The bus design consists of a Serial Bus, two masters with their respective master interfaces, and three slaves. Each slave includes a slave interface and memory: two slaves have a 4K address space, ...
Serial I/O technologies are pushing further into computing, as Intel encourages the switch away from the PCI-bus and existing memory buses. The microprocessor firm said PCI-Express will be standard ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results