This is the first task for the Electronics and Power Department. It consists of two assignments: the first involves building a circuit with an Arduino UNO and a push button, while the second involves ...

今回は前回のLED点灯を押しボタンスイッチで制御します。押しボタンスイッチは、ボタンを押すことであらかじめ決まっているピン同士が接続されます。今回は押しボタンスイッチを押すことで、GND（0V）に接続されたピンとマイコンボードと繋がっている ...

今回は、生徒と授業で学べるように、ArduinoをつかってLEDを点灯させるにはどうしたらいいのかを、基礎基本から学んでみようかと。 Tinkercad をつかって学ぶ 何もないところから学ぼうとすると大変ですし、生徒といっしょにってなったら難しいものです。

connected LED and button to the service over WiFi. The LED and button can be controlled and monitored from a dashboard. - An LED is connected to BCM pin 21, physical pin 40. - A (normally open) ...

You can read the state of a button using Arduino and a few lines of code. The actual state is shown in the Serial Monitor window as 0 or 1, 0 meaning the button is not pressed and 1 that the button is ...

Here is a 3D light show that will astound you with its combinations. Inexpensive and easy to make thanks to an Arduino controller, the design enables you to play with the existing effects and, most ...

Building IoT projects with touchscreens used to be a headache, involving numerous components, messy wiring, and endless troubleshooting. But the ESP32-S3 Box-3 makes things way easier. It is an all-in ...

I made this Arduino 8 bit binary led counter as a solution for one member from Arduino forum. He asked if somebody can make a project that displays a decimal number in 8 bit binary format using 8 leds ...