### 1. Install Blynk Library using built-in library manager in Arduino IDE <a href="#1-install-blynk-library-using-built-in-library-manager-in-arduino-ide" id="1 ...

Android/iOS: If you want to control a Raspberry Pi or Arduino connected device from your phone, you’d usually need to know at least some programming. Blynk is an app that makes it easier to control ...

Makers, developers and hobbyists that enjoy the building projects using the Arduino platform, Raspberry Pi or similar but sometimes find it difficult to connect the development boards to an Android or ...

For many people who like to build things that use Arduino to operate one of the most difficult parts is making an app or software to control the project. A new program called Blynk has turned up ...

Connect the +ve end of the red led to pin 11 then connect the +ve end of the blue led to pin 10 then connect +ve end of the green led to pin 9. Take all the grounds common and connect to a 1k ohm ...

Blynkの表示系ガジェットを使ってみます。💪 1、main.cpp void setup() { Blynk.begin(auth, serv, port); tmr.setInterval(1000, [](){ Blynk.virtualWrite(V0, BlynkMillis()/1000); }); } ...

Last time, I talked about how my storage situation and my cheap nature led me to build an RC joystick controller with a cell phone app and an ESP8266. The key to making this easy was to use the GUI ...

Imagine if you could run this bot around while you were not even home? (Photo: Helena Jacoba/Creative Commons) So you’ve built a robot that you chase your cat with, but it’s only any good when you’re ...

今度はvirtualの機能を使ってLEDを光らせてみます。💪 Blynkの設定は前回のまま、main.cppを書き換えてLEDを光らせます。 RaspberryPiらしく点灯にはコマンド＆シェルを使います。 1、シェルの作成 点灯シェルはこんな感じにしました。nanoでエディターを立ち上げ ...